Siphons

FLOOR DRAIN, SIDE, multi-purpose

Type: PVBU DN 50 stainless steel Color: grey Material: Polipropilen, a grid of stainless steel flow rate 501/min Possible applications: The floor drain is intended for collection of rain water (surface water) inside and outside the building. In areas protected from frost used water seal for protection against odor with a cap, in the middle of unprotected from frost used dry zipper for zaštltu of smell has a flap. Installation: The main body is pushed over the throat of the sewage pipe with a sealing 0-ring. After leveling in both axes of the main part before concreting covers cap. After maturing concrete cap is removed and set to continue with the ring remover, and measured the required height of the ring.

FLOOR DRAIN, LOWER

Type: PVS DN 110 Color: black Material: Polipropilen flow: 1001/min Possible applications: The lower floor drain is designed to drain water into drains.

FLOOR DRAIN, LOWER

Type: PVS DN 110 Stainless Steel Color: black Material: Polypropylene, a grid of stainless steel flow 1001/min Possible applications: The lower floor drain is designed to drain the water into drains.

ROOF WATER COLLECTOR

Type: KVB DN 110 Color: black Material: Polypropylene with UV stabilizer Flow: 1001/min Possible applications: Sewage outfall is designed to collect rainwater (surface water) inside and outside the building. Installation: The main body is pushed over the throat of the sewage pipe sealing O-ring, and the main body is placed swivel cartridge that must be faced, depending on the final shape of the floor (tiles, etc.). After leveling in both axes of the main part before concreting covers cap. After equalization in both axes of the whole system is sealed with concrete. After hardening of concrete to the main body we install a holder flaps superimposed with O-ring and flap for protection against odor. Weight on the flap must face the sewage pipeline. It is further fitted with a basket holder and front grille.

SIDE SEWER OUTLETS

Types: LSV DN 125, LSV DN 110 Color: black Material: Polypropylene with UV stabilizer flow: 550 l/min (400 l/min) Possible applications: collector is designed for collecting of discharged rain water (surface water). Installation: before installing outlets need to do in advance to cover the corresponding opening for drainage gutter. The main body we put on the throat of sewage pipelines, leveled in both axes and pour concrete up to the upper edge of the body. During concreting it is advisable to set a detachable lid and cover the outfall. After hardening of concrete into the discharge body we install damper for protection against odor and recycle filtering coarser impurities. If the collector is used only for evacuation surface water, it is possible to replace the cover of the drain gutter grate.

NEW OFFER
// Contact
Ivana Pavla II 201
21215 Kaštel Lukšić
tel: +385 21 230 533
fax: +385 21 261460
email: kup[a]kup.com.hr
// Working hours:
Workday: 7.00-16.00
Saturday: 7.00-12.00
// Send message: